TOXINCLEAR
CLEANING SUSPENDED MATERIALS, REDUCING VISCOSITY AND FOAM
Ngày cập nhật: 24/06/2026
Uses: Sediments organic matter and precipitates heavy metals.
Ingredients: Sodium thiosulfate, Sodium lauryl sulfate, EDTA, carrier to make up the required amount.
INSTRUCTIONS FOR USE:
- Reducing viscosity due to contamination and foam: 3-4 liters/1000 m³ of water, use every 2-3 days.
- Removing heavy metals, neutralizing chlorine-containing chemicals, reducing chemical shock: 2 liters/1000 m³ of water.
- Treating luminescent water: 2-3 liters/1000 m³ of water. For increased effectiveness, pre-treat with BIOXIDE 150 at a dose of 0.3 ppm, then use TOXINPOND after 12 hours.
- Pond liner cleaning: 2-3 liters/1000 m2.
Instructions: Dilute with sufficient water and spread evenly across the pond.
Warning: Avoid contact with skin and eyes. Wear a mask and gloves when using.
Ingredients: Sodium thiosulfate, Sodium lauryl sulfate, EDTA, carrier to make up the required amount.
INSTRUCTIONS FOR USE:
- Reducing viscosity due to contamination and foam: 3-4 liters/1000 m³ of water, use every 2-3 days.
- Removing heavy metals, neutralizing chlorine-containing chemicals, reducing chemical shock: 2 liters/1000 m³ of water.
- Treating luminescent water: 2-3 liters/1000 m³ of water. For increased effectiveness, pre-treat with BIOXIDE 150 at a dose of 0.3 ppm, then use TOXINPOND after 12 hours.
- Pond liner cleaning: 2-3 liters/1000 m2.
Instructions: Dilute with sufficient water and spread evenly across the pond.
Warning: Avoid contact with skin and eyes. Wear a mask and gloves when using.
Top products
